Commonly Asked Questions about the Casco Bay Health Index
What is the Casco Bay Health Index?
The Casco Bay Health Index was developed to provide a reliable, uncomplicated composite indicator of the Bay’s health, while also illustrating relative levels of eutrophication. The Index allows the scientifically-sound data collected through Friends of Casco Bay’s Water Quality Monitoring Program to be presented in a format that is easy to understand and to update.
What is the goal of the Index?
The goal of the Health Index is to present water quality information in an easy-to-understand visual format by condensing a large amount of existing data into a single score for each monitoring site. By summarizing a suite of environmental parameters into one score for each water quality monitoring site, each site can be ranked relative to one another, and trends—if there are any—can be more readily identified. This product, while quantitative in nature, should be considered a qualitative place to begin to determine environmental health. The sites are assigned colors—red, yellow or green, and are mapped to indicate the health of the waters around Casco Bay. Then we can ask: Which sites, based on the selected criteria, require a closer look? What is the relative condition of sites across a region? Are these conditions improving or degrading over time?
Where do the data for the Health Index come from?
The data used for the Health Index come from Friends of Casco Bay’s Citizen Stewards Water Quality Monitoring Program. Volunteers are well-trained using EPA-approved protocols developed by Friends of Casco Bay. They monitor specific sites and collect the data twice a day on 10 appointed Saturdays, between April and October. The Index incorporates the data for a 10-year span of time and can be updated annually by adding the most recent year’s data and eliminating the oldest. We can also look at the Index in five year increments to compare changes over time.
Which of the existing water quality parameters are most appropriate to use in the Index?
Friends of Casco Bay currently monitors five physical and chemical water quality parameters through our Citizen Stewards Water Quality Monitoring Program: temperature, salinity, dissolved oxygen (DO), Secchi depth, and pH. Of these, three have been selected for use in the Health Index—DO, Secchi depth, and pH.
Dissolved oxygen (DO) DO is expressed as Percent Saturation in order to incorporate temperature and salinity. When water holds all the oxygen it can at a given temperature and salinity, it is said to be 100% saturated. At a given site during a given sampling event, temperature and salinity are measured, and DO is measured in milligrams per liter (mg/l) and then compared with the mg/l for 100% saturation in those conditions. We look at the distribution of the Percent Saturation data; we consider the lowest 10th percentile as the worse-case conditions for a particular site. That 10th percentile threshold, expressed as a Percent Saturation number, becomes a component of the Health Index for that site.
Simply averaging all the DO data for a site might obscure the full extent of any challenged conditions. For example, if a site is eutrophic, wherein nitrogen pollution levels have resulted in a huge algal bloom, there will be large swings in DO levels between the morning and the afternoon; simply looking at the mean would obscure these swings.
Secchi depth Secchi depth is a measure of water clarity. The Index uses a mean of the data to characterize each site. Sites with more organic matter and sediments in the water will be murkier and will exhibit reduced clarity, resulting in shallower (lower) Secchi depth measurements.
pH pH is a measure of the acidity of the water. pH data exhibit tremendous variability—diurnal differences through the day and seasonal shifts through the year. The Water Quality Monitoring Program requires that measurements be collected at 7:00 a.m. and then again at 3:00 p.m. on each monitoring day. This allows for a look at the change in conditions over the course of a day. The pH at a site is influenced heavily by respiration and photosynthesis. Respiration by algae, both seaweeds and phytoplankton, adds carbon dioxide to the water, which lowers pH. Measurements collected in the early morning, at 7:00 a.m., reflect the conditions found after a night of respiration and no photosynthesis. Photosynthesis of course requires sunlight and removes carbon dioxide from the water, raising pH. By afternoon, at 3:00 p.m., pH measurements will reflect the result of photosynthesis. The change between the morning and afternoon measurements, termed the diurnal swing, can be indicative of the magnitude of respiration and photosynthesis, and, indirectly, the amount of algae in the water. Since an excessive bloom of algae is one symptom of nitrogen pollution, a large diurnal swing in pH can serve as an indicator of excess nitrogen. A small change in pH is expected in a healthy, productive coastal system, but a relatively large swing can indicate a challenged site. We calculate the difference between the morning and afternoon readings, the diurnal swing, then amass that dataset to calculate the mean for the Health Index for that site.
What ranges are most appropriate for the component parameters?
For each of the three components of the Health Index, we have defined ranges, between which we would expect to see worse-case and best-case conditions. These ranges have been defined by looking not only at data for Casco Bay, but also data from other regions, state and federal guidelines, and relevant scientific literature.
|Parameter:||0 point value||100 point value|
|Percent Saturation of Dissolved Oxygen||65%||95%|
|Secchi Depth (meters)||0.2 m||3.0 m|
|pH (diurnal swing)||0.4||0.1|
How is the Health Index score calculated?
Each of the components calculated for a given site is plotted along the scale for that parameter. We use a natural logarithm formula to determine where on the scale of 0 to 100 a particular component falls. For example, a site’s calculated 10th percentile threshold for the Percent Saturation parameter will fall between 65% and 95% at a specific point on the scale between 0 and 100. The same is done for the Secchi depth component and the diurnal swing in pH. Now we have three numbers which fall between 0 and 100. These are added together and divided by 3 to obtain the mean, which is the Health Index score for that site.
How are the final Health Index scores presented?
After each site has a Health Index score associated with it, it can be classified as Good, Fair, and Poor, determined by score thresholds. A score of 85 and above is considered “Good”, a score of 70 to 84 is “Fair”, and anything below 70 falls into the “Poor” category.
What is eutrophication?
Eutrophication occurs when too many nutrients (and occasionally other factors) fuel explosive plant growth. While nitrogen is an essential nutrient in marine systems, too much nitrogen can become a pollutant when it triggers excessive algal growth. This growth can result in low DO measurements, shallow Secchi depth readings, and wide variations in pH.